Waɗannan su ne maki 3 don ƙirar zafin jiki mai girma tare da guduro PPSU

Menene fa'idodin kayan PPSU?

Juriya na ɗan gajeren lokaci na filastik filastik PPSU ya kai digiri 220, kuma zafin jiki na dogon lokaci zai iya kaiwa digiri 180, kuma yana iya jure yanayin yanayin zafin mai na 170-180 digiri.Sassan PPSU suna da kwanciyar hankali mai kyau, kuma suna iya jure wa ruwan zafi/firiji/mai mai.Tare da wannan kyakkyawan dukiya, ana iya amfani da PPSU don samar da samfurori masu inganci da kayan aiki masu girma.Yanzu ya zama abu na farko don maye gurbin karafa, yumbura da polymers mai wuya.

Ana ƙara amfani da robobi na PPSU a cikin shirye-shirye da sake dumama abinci mai zafi, musamman don manyan abubuwan ƙarfin lantarki waɗanda dole ne su sami kwanciyar hankali mai girma da kyawawan kayan aikin injiniya & kyawawan kaddarorin wutar lantarki da babban juriyar tsufa na thermal, kyakkyawan juriya na wuta, da kyakkyawan juriya ga lalata sinadarai. da kuma hydrolysis.

Tare da wannan, ya zama wani abu mai mahimmanci a cikin aikace-aikace masu yawa a cikin masana'antu irin su sararin samaniya, lantarki da kayan lantarki, motoci da sufuri.

Yadda za a yi sarrafa zafin jiki don gyare-gyaren PPSU?

Kamar yadda yake tare da sauran injiniyoyin thermoplastics, barga samar da ingantattun gyare-gyaren sassa na buƙatar daidaitaccen kulawa da zafin jiki na ƙirar allura mai zafin jiki.Dukansu ruwa da mai suna iya daidaita yanayin zafin jiki tsakanin 140 zuwa 190 digiri.Idan na'urar sarrafa zafin jiki an tsara shi da kyau, ana iya amfani da ruwa kimanin digiri 200 azaman kafofin watsa labarai na zafin jiki.Hakanan ana iya amfani da sarrafa zafin jiki na lantarki a wasu lokuta.Kafin yin gyare-gyaren allura, kayan PPSU ya kamata a bushe, muna ba da shawarar bushe kayan tare da yanayin zafi na 150-160 digiri na 3-6 hours.Ganga na injin gyare-gyaren allura ya kamata a tsaftace sosai.Kuma zafin allurar ana ba da shawarar a sarrafa shi a kusa da digiri 360-390.

Yadda za a yi babban zafin jiki allura molds ga PPSU abu?

Tsarin allura don kayan PPSU dole ne su iya jure yanayin zafi mai girma azaman kayan aikin gyare-gyaren zafin jiki mai girma.Baya ga ɗaukar madaidaicin ƙira na inji da zaɓar kayan ƙira masu dacewa, yakamata a yi amfani da hoses masu jure zafi da matsi don haɓaka ƙirar tashoshi masu sanyaya, hatimi, da masu haɗawa.

Wuraren Zane:

1. Zabi da maganin karfe: a).Ya kamata a yi la'akari da zafin jiki na mold a kan digiri 140 zuwa 150, kuma ya kamata a yi la'akari da rayuwar ƙirar a cikin samar da taro.b).Ana buƙatar jiyya mai zafi don zama HRC60-65 gabaɗaya.c).Jiyya na Electroplating na iya ƙara rayuwar sabis na gyare-gyare.

2. Siffar mai gudu: zagaye ko trapezoid ya dace.Ana kuma buƙatar rijiyar slug mai sanyi.

3. Nau'in Ƙofar: Ƙofar fil, ƙofar tab, ƙofar diski, ƙofar magana, ƙofar gefe, ƙofar kai tsaye da ƙofar ƙasa.

4. Gas Venting: Venting yana da matukar muhimmanci ga PPSU kayan mold.Rashin isashshen iska zai haifar da konewa, canjin launi da m surface da sauransu.Tushen iskar gas yawanci tsayin 0.015 ~ 0.2mm kuma sama da 2mm fadi.

Suntime Precision Mold yana da wadataccen gogewa na ƙirar allurar filastik yin don ƙirar zafin jiki don abu kamar PPSU da PEEK.Abokan ciniki suna da matukar farin ciki tare da babban ingancinmu da lokacin jagorar sauri.Hoton da ke ƙasa yana ɗaya daga cikin maɗaurin zafin jiki da muka yi don ɓarna & sassa masu dacewa.Wuri 4 ne mai cirewa ta atomatik.Don ƙarin bayani game da irin wannan gyare-gyare, da fatan za a duba nazarin yanayin mu a gidan yanar gizon:https://www.suntimemould.com/auto-unscrewing-plastic-injection-mould-with-ppsu-material-high-temperature-mold-product/