• Babban zafin jiki auto unscrewing aikin yana da mold zafin jiki na 160 digiri da guduro zafin jiki na 380 digiri.
• Wannan ƙwanƙolin rami 4 yana da jimlar lokacin sake zagayowar na daƙiƙa 35 tare da motsi maras kyau.
Sashe yana da babban haƙuri tare da ƙasa da ƙasa+/-0.02mm.
• Ana amfani da sassan a cikin na'urori na tsarin ruwa mai zurfi na teku.
| Kayan aiki da Nau'in | Ruwa tsarin kayayyakin auto unscrewing 4 rami mold, PPSU abu, high zafin jiki mold | |||||
| Sunan sashi | MINI PISTON | |||||
| Guduro | PPSU | |||||
| No. na rami | 1*4 | |||||
| Tushen Motsi | LKM S50C | |||||
| Karfe na rami&Core | H-13 HRC48-50 /H-13 HRC48-50 | |||||
| Nauyin kayan aiki | 430KG | |||||
| Girman kayan aiki | 493X454X440 | |||||
| Danna Ton | 120T | |||||
| Mold rayuwa | 800000 | |||||
| Tsarin allura | Cold mai gudu mold | |||||
| Tsarin sanyaya | 160 ℃ | |||||
| Tsarin fitarwa | unscrewing ta mota da dabaran kaya | |||||
| Maki na musamman | mold zafin jiki 160 ℃, kayan zafin jiki 380 ℃ | |||||
| Wahala | unscrewing sosai santsi, sake zagayowar lokaci 39'S, haƙuri +/- 0.02mm. | |||||
| Lokacin jagora | makonni 5 | |||||
| Kunshin | Anti-tsatsa Takarda da fim, ɗan anti-tsatsa mai da akwatin plywood | |||||
| Shiryawa abubuwa | Takaddun shaida na karfe, ƙirar kayan aikin 2D na ƙarshe & 3D, takaddar gudu mai zafi, kayan gyara da na'urorin lantarki… | |||||
| Ragewa | 1.007 | |||||
| Ƙarshen saman | B-2 | |||||
| Sharuɗɗan ciniki | FOB Shenzhen | |||||
| Fitarwa zuwa | Ostiraliya | |||||
• Kayan aikin gyare-gyaren allura yana cirewa ta atomatik ta mota da dabaran kaya.
• Akwai faranti da yawa a cikin gyaggyarawa ɓangarorin huɗu kamar yadda yanayin zafin jiki ya yi yawa.
• Wannan 4 cavity mold yana da jimlar gyare-gyaren sake zagayowar lokaci 35 seconds da sashi haƙuri ne kasa da +/-0.02mm.
Mene ne auto unscrewing allura gyare-gyaren?
Auto unscrewing allura gyare-gyaren tsari ne da ke haɗa gyare-gyaren allura na kayan filastik tare da cirewa ta atomatik da cire zaren dunƙule (na waje ko na ciki ko duka) daga sassa da aka ƙera.
Ana amfani da wannan tsari don masana'antun masana'antu kamar su brackets, ƙulli, fasteners, iyakoki, bawuloli da ƙari.
Tsarin allura mai cirewa ta atomatik ya ƙunshi farantin sprue da farantin core tare da na'urar zaren zaren da ke ba da damar cirewa ta atomatik bayan ɓangaren ya huce.
Wannan tsari yana kawar da buƙatar da hannu cire sassa na zaren kamar yadda ake yi ta atomatik da zarar an fitar da ɓangaren daga cikin rami.
Abubuwan da ke tattare da gyare-gyaren allura na atomatik sun haɗa da tanadin farashi saboda rage farashin aiki, ingantacciyar ingancin samfur tunda akwai ƙarancin kulawa da hannu, ingantaccen aminci tunda yana kawar da duk wani kuskuren ɗan adam wajen cire sukurori, da haɓaka maimaitawa da daidaito saboda uniform. sarrafa kansa tsari.
Bugu da ƙari, ana iya amfani da wannan tsari don ƙirƙirar ɓangarori masu haɗaɗɗun geometries kamar zaren ciki da yawa ko screws ba tare da ƙarin matakan sarrafawa da ake buƙata daga baya ba.
Ra'ayin ƙira
3D mold zane
Ƙirar ƙira don ƙirar ƙira ta atomatik
Ƙirƙirar ƙirar allura ta atomatik tana buƙatar yin la'akari da samfur, kayan filastik, da girman kayan aiki.Mafi na kowa mafita ga auto unscrewing gyare-gyaren allura sun haɗa da ainihin saka tuki ta hanyar rotary, tara, ko tsutsa.
Lokacin zayyana ƙirar allura ta atomatik, yana da mahimmanci a yi la'akari da kayan samfurin, diamita da tsayin zare, kauri na bango da ƙididdige ƙididdiga, nau'in filastik da filaye da aka yi amfani da su a cikin ƙirar allura.Bugu da ƙari, ƙirar aikin gefe na iya zama dole don magance wasu matsalolin da ke tasowa lokacin buɗewa da rufe ƙirar.Don haɓaka lokacin sake zagayowar sosai yayin da har yanzu ake samun sakamako mai inganci, ana amfani da gyare-gyare ta atomatik.
Akwai nau'ikan guda biyu: unscrewing da hannu (demoded da karfi) da kuma kwancewa ta atomatik.Manual unscrewing yana da ƙananan yawan aiki, amma tsarin ƙirar yana da sauƙi kuma ya dace da ƙananan samar da tsari;atomatik unscrewing yana da high dace da kuma barga ingancin da dace da babban tsari samar.A cikin atomatik unscrewing mold tsarin, dole ne a warware matsalolin aminci, kwanciyar hankali da kuma amfani da tsarin tsarin.
• Binciken sassan filastik: Binciken DFM don duba sassan don kayan aiki da kuma nemo hanyar ceton kuɗi da ingantaccen bayani.
• Zaɓin tsarin mai gudu: idan ƙarar samarwa yana da girma kuma inganci ya kamata ya zama babba, mai zafi mai zafi (kamar ƙofar bawul) yana da ma'ana da amfani.
• Sanyi:
Don inganta ingantaccen samarwa, hana lalacewar sassa na filastik, da kuma hana mannewa cikin rami wanda ya haifar da haɓakar zafin jiki na sassa na ƙirar, tsarin sanyaya na ƙirar dole ne ya zama cikakke kuma abin dogaro.
• Zaɓin kayan ƙira: kullum, muna zaɓar kayan ƙira tare da juriya mai ƙarfi da kayan taurin.A cikin wannan aikin, mun yi amfani da karfe H13.
• Mold drive part design: akwai al'ada 3 hanyoyin da za a tsara bangaren drive, wanda shine Hydraulic cylinder + rack, Motor + Chain da Rack + Gears.
Masu zanen mu suna aiki sosai, don DFM, an gama shi a cikin kwanaki 2, saboda aikin yana da gaggawa sosai, don haka abokan ciniki suna buƙatar yin 3D zane kai tsaye, babu buƙatar yin 2D layout, don haka 3D ya ƙare a cikin kwanaki 3.
Muna da masu zanen kaya 6 tare da gogewa sama da shekaru 8 a cikin gida.Kuma muna da abokan haɗin gwiwar ƙira waɗanda ke da ƙwarewa kuma kawai don ƙirar ƙira da kasuwancin ƙirar sassa azaman madadin lokacin da kuka yarda don ba mu damar neman taimako.
FAQ
Don yin gyare-gyaren allura ta atomatik
Matsakaicin zafin jiki shine 160-180 digiri.
Model: +_0.01mm,
Bangaren Filastik: +_0.02mm
Samfurin inji: +_0.005mm.
Don yin gyare-gyaren filastik, muna amfani da kayan filastik sun haɗa da PPSU, PEEK, ABS, PC, PC + ABS, PMMA, PP, HIPS, PE (HDPE, MDPE, LDPE).PA12, PA66, PA66 + Gilashin fiber, TPE, TPR, TPU, PPSU, LCP, POM, PVDF, PET, PBT…
Kuma don simintin mutuwa, kayan aluminium yawanci A380, A356,6061 ne.
DFM: Kullum cikin ranakun aiki 2.
2D mold layout: Kullum a cikin 3-4 aiki rana.
3D mold zane: Kullum a cikin 4-5 aiki rana.
Ma'aikatar mu tana cikin Chang Wani gari na Dong Guan City a kudancin kasar Sin, wanda shine wurin masana'anta na farko.Minti 10 zuwa Shen Zhen.Minti 30 zuwa filin jirgin sama na Shen Zhen.
a).Mawadata gogaggun tallace-tallace da injiniyoyi suna bin aikin kuma suna sadarwa cikin ƙwararrun Ingilishi.
b).24/7 salon sabis.Gudanar da ayyuka ɗaya zuwa ɗaya.
c).Ku zo ziyarci kowane lokaci kuma ƙungiyar Suntime suna ziyartar abokan ciniki kowace shekara.
d).rahoton mako-mako kowane Litinin.(2 rahotanni a mako idan an buƙata).
e).Duk wani amsa imel a cikin sa'o'i 24, zaku iya kiran mu kowane lokaci, ko da a tsakiyar dare.
